Low Pressure Moulding
> Manufacturers
MANUFACTURERS
1 2 Next >> Displaying records 1-20 of 24
Product
2637 Olamef AS1-Automatic system for TP/R-PR Olamef AS1-Automatic system for TP/R-PR
The AS1 is an automatic system that fits only the TP/R-PR machine. This equipment allows the machine to reach higher production.
(Accessories - Olamef)
2639 Olamef CS10/CS20/CS30/CS40 Feeder Olamef CS10/CS20/CS30/CS40 Feeder
These loose component feeders have been designed to handle loose axial components only. They are manufactured with minor differences to fit the machine they are made for.
(Accessories - Olamef)
2641 Olamef MOT Motors Olamef MOT Motors
These motor drive units attach to the TP6 manually operated machines. The 3 motors have a speed control knob to adjust the operation speed. The emergency button immediately st...(more)
(Accessories - Olamef)
2613 Olamef Radial Lead Trimmer TP/LN-100 Olamef Radial Lead Trimmer TP/LN-100
TP/LN-100 cuts leads on loose radial components for a very wide range of radial parts with lead diameter up to 0,8 mm.
(Component/Lead Trimmers - Olamef)
3485 Olamef Radial Lead Trimmer TP/LN-500 Olamef Radial Lead Trimmer TP/LN-500
TP/LN-500 Guillotine action lead trimmer for loose radial components with wire lead diameter of up to 1,4mm.
(Component/Lead Trimmers - Olamef)
2653 Olamef Supercut/RP Olamef Supercut/RP
Designed to cut and form taped radial component leads, the curl formed by this model allows the components to remain spaced and locked in the PCB, making assembly operations e...(more)
(Taped Component Machines - Olamef)
2651 Olamef Supercut/TS1 Transistor Former Olamef Supercut/TS1 Transistor Former
Pneumatic machine designed to cut loose radial component leads, manual feed on top of the machine. Large variety of dies available. More powerful cylinders, stronger and more ...(more)
(Loose Radial Trimmers/Formers - Olamef)
2643 Olamef TNS - Helps pull tape back of machine Olamef TNS - Helps pull tape back of machine
The TNS accessory helps to pull the tape out of the back of the machine after the components have been cut and formed. It mounts easily to any of the models designed for taped...(more)
(Accessories - Olamef)
2629 Olamef TP/IC-F Olamef TP/IC-F
The model TP/IC-F has been designed for straightening the leads of IC components. The machine is supplied with tube holders to accomodate components having 0.3 and 0.6 inc. pi...(more)
(Tube Component Formers - Olamef)
2621 Olamef TP/R-PR Olamef TP/R-PR
A very versatile pneumatic machine designed for cutting and forming taped radial components. The die assembly “SMS” is equipped with a wire holder to keep leads firmly in pos...(more)
(Taped Component Machines - Olamef)
2615 Olamef TP/SC4 TP/TS1 Olamef TP/SC4 TP/TS1
The 2 cylinder TP/SC4 cuts and forms loose radial components, using available forms. A 3 cylinder model spreads out and forms the outer leads and spreads the central one. TP/...(more)
(Loose Radial Trimmers/Formers - Olamef)
2617 Olamef TP/TC4 Olamef TP/TC4
TP/TC4 is designed for cutting loose radial components. Two belts hold the leads and feed them through the rotory blades, that cut them, without any bur and damage to the comp...(more)
(Component/Lead Trimmers - Olamef)
2631 Olamef TP/TC5 Olamef TP/TC5
TP/TC5 is designed to cut and straighten directly from the stick, the leads of several types of radial component, such as relays, transistors and ICs.
(Tube Component Formers - Olamef)
2633 Olamef TP/TO-CF Transistor Forming Machine Olamef TP/TO-CF Transistor Forming Machine
TP/TO-CF automatic machine designed to cut and form TO-220, TO-218, TO-126 transistors in tubes. Operation is automatic and PLC controlled.
(Tube Component Formers - Olamef)
2597 Olamef TP6 Olamef TP6
Cast frame TP6 is designed for cutting and bending taped axial components with lead diameter from 0.4 to 1.4 mm. Can be automated.
(Taped Component Machines - Olamef)
2645 Olamef TP6-EC Olamef TP6-EC
Fabricated frame TP6-EC is designed for cutting and bending taped axial components with lead diameter from 0.4 to 1.3mm. Can't be automated.
(Taped Component Machines - Olamef)
2599 Olamef TP6/PR-B Olamef TP6/PR-B
The model TP6/PR-B is designed for cutting-forming and bending taped axial components. The “stand-off” form keeps the component body off the P.C. Board. The machin...(more)
(Taped Component Machines - Olamef)
2601 Olamef TP6/PR-F Olamef TP6/PR-F
The model TP6/PR-F is designed for cutting, and forming taped axial components. There are three versions available depending on the lead diameter of the component: 0.5 to 0.9 ...(more)
(Taped Component Machines - Olamef)
2619 Olamef TP6/R Olamef TP6/R
Cast Frame TP6/R is designed for cutting radial components on tape. It can be supplied for two types of tape: either with hole pitch 12.7 or 15mm. Can be automated.
(Taped Component Machines - Olamef)
2655 Olamef TP6/R-EC Olamef TP6/R-EC
Fabricated frame TP6/R-EC is designed for cutting radial components in tape. It can be supplied for two types of tape: either with pitch hole of 12.7 or 15mm. Can't be automat...(more)
(Taped Component Machines - Olamef)
1 2 Next >> Displaying records 1-20 of 24
Aluminium Building System  -  Antistatic Products  -  Cable Clips & Accessories  -  Cable End Terminals  -  Component Counters  -  Component Lead Formers  -  Component Storage  -  Component/Lead Trimmers  -  Digital Microscopes  -  Electronic Tape Dispensers  -  Fasteners  -  Hand Tools  -  Hardware  -  Lead Free/MSD Handling  -  Marking Stamps  -  Mounting Hardware  -  PCB Depaneling  -  PCB Fuse Clips  -  PCB Mounting  -  PCB TAB Terminals  -  Spacers  -  Terminals: General  -  Terminals: PCB  -  Test/Wiring Pins  -  Thermal Products  -  Vacuum Sealers  -  Wave Soldering Products

© Copyright Tarapath Pty Ltd. All rights reserved. Terms and Conditions
Web Design by Evolution 7 - Web Design Melbourne Web Design Melbourne & Sydney